Q22158

16-38-98-OT-B49 DIAMOND TRUCK BODY PAINTED: AND INSTALLED. TO MOUNT ON 56″ CA

— 16″ DEEP COMPT WITH 49″ WIDE BED AREA
— CHROMED T HANDLE 3 POINT LOCKING MECH
— ALL DOORS KEYED ALIKE SS LOCK POCKETS
— 2 SHELVES IN EA VERTICAL COMPARTMENT
— 1 SHELF IN EA HORIZONTAL COMPARTMENT
— DOUBLE PANEL DOORS DOUBLE DOOR SEALS
— 12″ TALL TAILGATE
— REAR STEP BUMPER WITH LIGHTS MOUNTED IN KICK PLATE
— UNDERBODY SEALED WITH HD UNDERBODY SEALER
— BODY SIDE PACS MADE OF A 60 STEEL
— 12 GA STEEL DIAMOND PLATE FLOOR.
— 3/16 FRONT AND REAR CROSS MEMBERS

— OPEN TOP LIDS FLAT TOP SQUARE CORNERS OPEN TOP TRAY APPROX 4″ DEEP WITH DIVIDERS EVERY 4″ REMOVABLE. TRAY APPROX 9″ FRONT TO BACK
POLISHED ALUMINUM OVER LAY KIT
– OVER TOP LIDS.
– TOP OF TAILGATE GUARD.
– ROCK GUARDS.

[4] FOUR WELD IN D-RINGS IN CARGO WALLS. 9″ INCHES OFF CARGO FLOOR. [2] TWO AT REAR 4″ FROM END OF CARGO AREA AND [2] 36″ INCHES FROM FRONT BULKHEAD.

BULLET SPRAY ON BEDLINER IN CARGO AREA. WALLS, FLOOR, BULKHEAD, AND FRONT SIDE OF TAILGATE. SPRAY TOP STEP OF BUMPER.

2″ X 2″ TUBE HEADACHE RACK. [ H-DESIGN WITH WORK LIGHT BRACKETS ON EACH SIDE OF THE TOP CROSS BAR [5″ X 6″ X 12GA]. 5″ X 5″ FRAMED AREA IN UPPER CORNERS OF RACK. FRAME WITH 2″ X 1/4″ FLATBAR FOR CUSTOMERS WORK LIGHTS. AMBER LIGHT BAR MOUNTING BRACKETS [2] WILL BE SUPPLIED SO CUSTOMER CAN MOUNT LIGHT BAR TO HEADACHE RACK 2 1/2″ X 11″ REMOVABLE BRACKETS. BUILD RACK SO THE BOTTOM CROSS BAR IS FLUSH WITH TOP OF CAB.

19″ TALL TAILGATE (T-HANDLE)
51 1/4″ WIDE

VISE BRACKET PLATFORM MOUNT CURBSIDE

RAISED FRONT COMPT TO 42″ TALL BODY REINFORCE TOPS WITH 10 GA