26177

22.5-38-108-OT-B49 DIAMOND TRUCK BODY PAINTED: AND INSTALLED. TO MOUNT ON 60″ CA

— 22.5″ DEEP COMPT WITH 49″ WIDE BED AREA
— CHROMED T HANDLE 3 POINT LOCKING MECH
— ALL DOORS KEYED ALIKE SS LOCK POCKETS
— 2 SHELVES IN EA VERTICAL COMPARTMENT
— 1 SHELF IN EA HORIZONTAL COMPARTMENT
— DOUBLE PANEL DOORS DOUBLE DOOR SEALS
— 12″ TALL TAILGATE
— REAR STEP BUMPER WITH LIGHTS MOUNTED IN KICK PLATE
— UNDERBODY SEALED WITH HD UNDERBODY SEALER
— BODY SIDE PACS MADE OF A 60 STEEL
— 12 GA STEEL DIAMOND PLATE FLOOR.
— 3/16 FRONT AND REAR CROSS MEMBERS

— OPEN TOP LIDS FLAT TOP SQUARE CORNERS OPEN TOP TRAY APPROX 4″ DEEP WITH DIVIDERS EVERY 4″ REMOVABLE. TRAY APPROX 12″ FRONT TO BACK

–HEAVY DUTY 2″ X 3″ AND 2″ X 2″ TUBE OVER CAB RACK. 196″ TOTAL LENGTH AND 71″ WIDE. 12″ TALL LOAD SUPPORTS EACH SIDE AND FRONT SECTION. PARTITION OFF 9″ SECTION ON CURB SIDE. [ SEPARATES LOAD ]. #9 EXPANDED METAL FRONT SECTION [ 30″ BACK FROM FRONT ] FRONT, SIDES , AND BOTTOM OF OVER HANG SECTION. STREET SIDE OF RACK TO HAVE OPEN AREA FOR LOADING APPROXIMATELY 48″ WIDE. RACK STRAPS PLACED ON EACH SIDE OF RACK. [ TOTAL OF 4] . REMOVABLE REAR BAR AND FIXED CENTER BAR. WIRE SPOOL HOLDER PLACED AT REAR OF RACK . FRONT AND REAR LEG SUPPORTS TO BE MOUNTED TO BED FLOOR. J – HOOKS PLACED ON OUT SIDE RAIL [ 4 EACH SIDE ]. PAINT RACK WHITE, SAME AS TRUCK BODY.

–STREET SIDE FRONT CUSTOM FORMED 26″ UNDER FLOOR STORAGE COMPARTMENT. PLACE THREE DIVIDERS, EVENLY SPACED. 12 GA. STEEL CONSTRUCTION.

–STREET SIDE FRONT THROUGH COMPARTMENT. [1] ONE 8″ INCH HEAVY DUTY 60″ LONG ROLL OUT DRAWER. THIS DRAWER IS TO BE AT FLOOR LEVEL, AND BE DIVIDED AS PER THE ATTACHED DRAWING. THE THROUGH COMPARTMENT WILL HAVE A 1″ INCH TUBE RAIL RETAINER LEVEL WITH THE TOP OF THE BED AREA.

–[1] ONE 3″ DRAWER INSTALLED IN STREET SIDE FRONT COMPARTMENT. MOUNT DRAWER 6″ INCHES BELOW DOOR OPENING. THERE WILL BE 5″ INCHES BETWEEN THE LARGE ROLL OUT DRAWER AND THE BOTTOM OF THE SMALLER 3″ DRAWER. [1] ONE FIXED, OR ADJ. SHELF ABOVE TOP 3″ DRAWER.

–TWO 2″ HEAVY DUTY HITCHES PLACED IN REAR BUMPER. PLACE HITCHES 20″ , AND 28″ OFF THE GROUND. HEAVY DUTY SAFETY D-RINGS PROVIDED NEAR HITCH. 6- WAY TRAILER PLUG. NOTE# THE HITCH HEIGHT NOTED IS ONLY A GUIDE. HITCH HEIGHT IS DETERMINED BY THE BUMPER HEIGHT.

–TWO ADDITIONAL HITCH STORAGE POCKETS FOR 2″ SHANK. UNDER REAR BUMPER [1] EA. SIDE.

1500 WATT POWER INVERTER. POWERDRIVE 1500W. . MOUNT IN STREET SIDE HORIZONTAL COMPARTMENT [FRONT OPEN SECTION]. ADD ALUMINUM GUARD TO PROTECT INVERTER.