25825

(DTB-307-1) 9′ FOOT DIAMOND SERVICE BODY. MODEL # 22.5-38-108-OT-B49. PAINTED WHITE AND INSTALLED.

–22.5″ DEEP AND 38″ TALL SIDE COMPARTMENTS. 49″ WIDE CARGO AREA

–ALUMINUM FRONT ROCK GUARDS. 18″ X 18″

–ALUMINUM REAR END PANEL GUARDS. 22.5″ X 12″ TALL

–L.E.D. INTERIOR COMPARTMENT ROPE LIGHTING. MOUNT LIGHTS ON BOTH SIDES AND TOP OF ALL SIDE COMPARTMENTS MAKING A HORSHSHOE PATTERN. WIRE TO O.E.M. UPFITTER SWITCH.

–STAINLESS STEEL T-HANDLE LOCK POCKETS. ALL LOCKS KEYED ALIKE. THREE POINT INTERIOR LOCK RODS.

– MASTER LOCK SYSTEM. ] ACCESS REAR PULL HANDLE CYLENDER LOCK

–HEAVY DUTY 2″ X 3″ X .120 TUBE OVER CAB RACK. BUILD FOR CREW CAB. REAR SWINGING CROSS BAR, AND REMOVABLE CENTER BAR. PAINTED WHITE.. ONE ROPE HOOK ON EACH DOWN LEG.

**–60″ TALL FRONT TOWER COMPARTMENTS BOTH SIDES. **

–[7] SEVEN HEAVY DUTY 250# CAPACITY ROLLER DRAWERS IN BOTH FRONT COMPARTMENTS. [4]=3″, [2]=4″ AND [1]=6″ DEEP DRAWERS. MOUNT LOW IN COMPARTMENT WITH FIXED SHELF ABOVE TOP ROLL OUT DRAWER. TOTAL OF [14] DRAWERS.

–[6] SIX HEAVY DUTY 250# CAPACITY ROLLER DRAWERS IN BOTH REAR COMPARTMENTS. [4]=3″ AND [2]=6″. TOTAL OF [12] DRAWERS

–18″ REAR WORK PLATFORM WITH THROUGH COMPARTMENT. ACCESS DOORS ON EACH SIDE WITH T-HANDLE LOCK POCKET. KEY THE SAME AS ALL COMPARTMENTS. 1/4″ INCH STEEL TOP SURFACE.

–REAR VISE MOUNT STAND. 9″ X 9″ X 1/4″ PLATE

–POLYUREA SPRAY ON BEDLINER IN CARGO AREA. FLOOR, BULKHEAD, WALLS, AND FRONT SIDE OF TAILGATE.

–ELECTRIC POWERED COMPARTMENT LOCKING SYSTEM. LOCKS WITH FACTORY DOOR LOCKING SYSTEM.

–TWO ROWS OF E-TRACK LOCATED ON EACH SED OF BED AREA WALLS.

–ALL LIGHTS TO BE L.E.D. AND MEET ALL FMVSS 108 STANDARDS

–5K POWER INVERTER MOUNTED UNDER REAR SEAT.

–[2] TWO AMBER STROBE LIGHTS FLUSH MOUNTED IN REAR BUMPER NEAR SIGNAL LIGHTS.